Built around real production needs
WACKER HDK® N20 is a functional additive beyond FRP alone. On GKFRP it sits under Fillers & Additives with emphasis on rheology control in resin systems.
Key benefits
- Provides thixotropy
- Viscosity control
- Helps improve sag resistance
- Suitable for various resin and coating systems
- Fine powder form
- TDS / SDS support available on request
How to use
- Add HDK N20 to the resin before the catalyst and disperse with a high-speed mixer until uniform and free of agglomerates.
- Dosage depends on the viscosity and sag resistance required; start low and increase gradually.
- Thixotropy boosters (such as glycols or polyols) can improve efficiency in some resins; test before use.
Safety and storage
The powder is very light and dusty: wear a mask and work in a ventilated area. Store sealed in a dry place to avoid moisture pickup.
Specifications, use conditions and application procedures should be checked against the current TDS/SDS before production implementation.
Application information
Hydrophilic untreated fumed silica
Builds viscosity, anti-settling and sag control in a range of polymer and composite systems.
Dispersion equipment, addition sequence and dosage strongly affect performance and must be validated in the actual formulation.

