Select by process requirements
A catalyst/initiator product for reactive resin systems.
Key considerations
- Use only with compatible resin systems
- Follow storage and safety requirements
- Do not alter dosing outside current TDS guidance
Characteristics
Trigonox V388 is a general-purpose MEKP for curing unsaturated polyester resins with a cobalt accelerator at room and elevated temperatures, for laminating resins and castings. Active oxygen 9.8–10.0%.
Storage
- Maximum storage temperature 25°C; SADT 55°C.
- Under recommended storage conditions the product stays within specification for at least 6 months after delivery.
Safety and storage
- Organic peroxide: store in the original container, tightly closed, in a dry, ventilated place away from sunlight and heat.
- Never mix peroxide directly with cobalt or amine accelerators, as this can react violently.
- Do not weigh out product in the storage room; keep away from acids, alkalis and heavy-metal compounds.
- Wear goggles and gloves; in case of eye contact rinse immediately with water and seek medical help. Read the SDS before use.
Specifications, dosage, operating conditions and safety requirements must be checked against the manufacturer’s current TDS/SDS before implementation.
Application information
Peroxide curing agent for unsaturated polyester
Considered for suitably accelerated polyester systems in FRP laminates or cast parts, subject to the exact resin grade and shop conditions.
Dosage, temperature, gel time, accelerator compatibility and storage limits must come from the current TDS/SDS, not a generic rule of thumb.

