Composite materials & technical support in Vietnam
TDS / SDS · Technical Support
ProductsApplicationsBrandsTechnicalAboutContact
Nouryon · Catalysts & Initiators

Butanox M-50 – MEKP Catalyst

A catalyst/initiator product for reactive resin systems.

BrandNouryon
CategoryCatalysts & Initiators
Code / GradeM-50
DocumentationTDS / SDS on request
Butanox M50
Nouryon M-50
Product overview

Select by process requirements

A catalyst/initiator product for reactive resin systems.

Key considerations

  • Use only with compatible resin systems
  • Follow storage and safety requirements
  • Do not alter dosing outside current TDS guidance

Characteristics

Butanox M-50 is a general-purpose MEKP with medium reactivity and low water content for curing unsaturated polyester resins with a cobalt accelerator at room or elevated temperature. Suited to hand lay-up, spray-up and RTM, particularly laminating resins, and recommended for marine applications.

How to use

  • Dose as a percentage of resin weight per the resin TDS, using a measuring bottle or scale.
  • Stir thoroughly after adding, without entraining air.
  • Do not exceed the recommended range to shorten gel time; adjust with accelerator or temperature as advised by the resin supplier.

Safety and storage

  • Organic peroxide: store in the original container, tightly closed, in a dry, ventilated place away from sunlight and heat.
  • Never mix peroxide directly with cobalt or amine accelerators, as this can react violently.
  • Do not weigh out product in the storage room; keep away from acids, alkalis and heavy-metal compounds.
  • Wear goggles and gloves; in case of eye contact rinse immediately with water and seek medical help. Read the SDS before use.
Technical note

Specifications, dosage, operating conditions and safety requirements must be checked against the manufacturer’s current TDS/SDS before implementation.

Application information

Product position

MEKP for unsaturated polyester resin

Typical use

Used with suitably accelerated polyester systems to achieve gel and cure under controlled conditions.

Technical confirmation

Do not apply one fixed ratio to every resin; confirm dosage, temperature, gel time and safety from the TDS/SDS.

CallZaloQuote