Multi-purpose water-based external mold release
AXEL MoldWiz EM-1212SF2 is a water-based external release agent with anti-rusting properties. It dries at room temperature to form a selective monomolecular film, supporting multiple demoldings per application.
TDS applications
- SMC and polyester composites
- Epoxy and vinyl ester
- Technical rubber
- Melamine and phenolic
- Water-based and non-flammable
- Will not negatively impact secondary painting, bonding or decorating
How to use
- Clean the mold with CleanWiz cleaner.
- Spray a thin coat or wipe on with a clean cotton cloth in two directions; let it dry completely with no moisture left on the mold.
- First use or after mold cleaning: heat the mold at 150–200°C for up to 2 hours to stabilize the film.
- During production, reapply a thin coat as needed.
Storage
Store in a dry, cool place away from sunlight and frost; keep the cap closed. Can irritate skin and eyes: wear gloves and goggles.
Typical properties
Mix well before use, protect from freezing and store below 39°C. Apply 2–3 initial coats to a clean mold and allow each coat to dry to the touch. Above 49°C tool temperature, spray a fine mist and allow it to dry completely.
GKFRP provides the current document upon request.

