Composite materials & technical support in Vietnam
TDS / SDS · Technical Support
ProductsApplicationsBrandsTechnicalAboutContact
Stoner · Urethane mold release

Stoner Urethane Mold Release – E236

A release agent and anti-stick lubricant specially formulated for molded urethanes. Aerosol, colorless and non-staining, with multiple part releases per application.

BrandStoner (Hoa Kỳ)
Code / GradeE236
Form12 oz (341 g) aerosol
Pack12 cans / case
Stoner E236 urethane mold release aerosol
STONER E236
Product overview

Fast urethane part removal, multiple releases per application

Stoner E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes and similar materials. A light coating produces best results and gives multiple part releases per application, improving molding efficiency.

Suitable molding processes

  • Injection, compression and transfer molding
  • Vacuum forming
  • Pour casting, die casting and extrusion
  • Rigid, semi-rigid and flexible urethane cast elastomers

Benefits

  • Urethane parts release quickly and easily from molds.
  • Parts can be painted, hot-stamped or otherwise decorated.
  • Improves part appearance and reduces defects caused by sticking.
  • Colorless and non-staining.
  • High levels of user and environmental safety.

Contains no

  • Class I or Class II ozone-depleting substances.
  • CFC or HCFC propellants.
  • Chlorinated solvents such as 1,1,1-trichloroethane or methylene chloride.

How to use

  1. Shake the can well before use.
  2. Hold the can 25–30 cm (10–12 in) from the mold surface.
  3. Spray a thin, even mist onto the mold. A light coating produces best results.

Storage and safety

Pressurized container: do not puncture or incinerate. Do not expose to heat or store above 49°C (120°F). Keep away from sparks, open flames, hot surfaces and other ignition sources. Refer to the SDS for full safety information.

Frequently asked questions

What materials is Stoner E236 for?

Molded urethanes and similar materials, including rigid, semi-rigid and flexible urethane cast elastomers.

Can parts be painted after release?

Yes. Parts can be painted, hot-stamped or otherwise decorated.

How should E236 be applied?

Shake well, hold the can 25–30 cm from the mold and spray a thin, even mist. A light coating gives best results.

Does it stain parts?

No. E236 is colorless and non-staining.

Does E236 contain CFCs or chlorinated solvents?

No CFC/HCFC propellants, no Class I/II ozone-depleting substances and no chlorinated solvents such as 1,1,1-trichloroethane or methylene chloride.

How is it packaged?

12 oz (341 g) aerosol cans, 12 cans per case.

Technical note

Trial on your mold and urethane system before production; refer to the SDS for full safety information.

CallZaloQuote