Composite materials & technical support in Vietnam
TDS / SDS · Technical Support
ProductsApplicationsBrandsTechnicalAboutContact
GKFRP · Mold Care

Citrus Mold Cleaner – A500

A product for mold cleaning and surface preparation before subsequent mold-care steps.

BrandGKFRP
CategoryMold Care
Code / GradeA500
DocumentationTDS / SDS on request
Citrus A500 Mold Cleaner
CITRUS A500 MOLD CLEANER
Product overview

Select by process requirements

A product for mold cleaning and surface preparation before subsequent mold-care steps.

Key considerations

  • For mold maintenance workflows
  • Check compatibility with the mold surface
  • Refer to current TDS / SDS before use

Characteristics

A citrus-based aerosol mold cleaner that removes grease, oil, wax, silicone and build-up from molds, metals, painted surfaces, ceramics and fiberglass. Cleans molds in or out of the press; fast drying with a citrus odor, free of chlorinated solvents and Class I/II ozone-depleting substances.

How to use

  • Spray onto a mold that has cooled to a safe temperature and let it penetrate for a few seconds.
  • Wipe clean with a clean, lint-free cloth; repeat on heavy deposits.
  • Let the surface dry completely before applying sealer or release.

Note

The aerosol contains flammable solvents: do not spray on hot molds, keep away from ignition sources and work in a ventilated area.

Technical note

Specifications, dosage, operating conditions and safety requirements must be checked against the manufacturer’s current TDS/SDS before implementation.

Application information

Product position

Mold cleaner for surface preparation

Typical use

Used to remove oil, old wax and surface contamination before polishing, sealing or applying a release agent.

Technical confirmation

Test a small area for mold-substrate compatibility and follow the current SDS for ventilation, PPE and storage requirements.

CallZaloQuote