Composite materials & technical support in Vietnam
TDS / SDS · Technical Support
ProductsApplicationsBrandsTechnicalAboutContact
GKFRP · Carbon & Advanced Reinforcements

Carbon/Fiberglass Hybrid Fabric – 2×2 Twill Blue

A high-performance reinforcement for composite structures requiring optimized mechanical performance.

BrandGKFRP
CategoryCarbon & Advanced Reinforcements
Code / Grade—
DocumentationTDS / SDS on request
Carbon Fiberglass Hybrid Twill Blue
GKFRP
Product overview

Select by process requirements

A high-performance reinforcement for composite structures requiring optimized mechanical performance.

Key considerations

  • Select fabric/fiber architecture according to layup
  • Confirm resin-system and cure compatibility
  • Application-based material support is available

Characteristics

A 2×2 twill hybrid weaving carbon with blue glass fiber for a decorative colored surface. The glass content lowers cost compared with all-carbon fabric; mechanical properties depend on the fiber ratio. Suited to decorative outer plies, accessories, sporting goods and interior parts.

Handling and lay-up

  • Cut on a clean table with sharp shears; tape the cut line to stop the edge fraying.
  • Keep the fabric dry and clean, free of oil, dust and skin contact; wear gloves.
  • Place plies in the fiber orientation of the lay-up design and avoid stretching, which distorts the weave.
  • Wet out evenly and consolidate with light rolling or with vacuum bagging or infusion to control resin content and voids.

Compatible resins

Use a clear, UV-stable epoxy for the outer ply to keep the fiber color. Test samples to check color after wet-out and cure.

Technical note

Specifications, dosage, operating conditions and safety requirements must be checked against the manufacturer’s current TDS/SDS before implementation.

Application information

Product position

Carbon–fiberglass hybrid fabric

Typical use

Combines surface appearance and properties from two fiber types in decorative or lightweight structural parts.

Technical confirmation

Confirm fiber ratio, areal weight, weave, color and resin compatibility for the exact supplied roll.

CallZaloQuote