Select by process requirements
A high-performance reinforcement for composite structures requiring optimized mechanical performance.
Key considerations
- Select fabric/fiber architecture according to layup
- Confirm resin-system and cure compatibility
- Application-based material support is available
What is prepreg
Prepreg is carbon fabric pre-impregnated at the factory with a precise amount of resin, usually epoxy. With a consistent fiber–resin ratio, prepreg laminates achieve high properties, low voids and more uniform surfaces than hand wet-out.
Processing and cure
- Prepreg is heat-cured to the temperature and time cycle of its resin system, usually with vacuum bagging and an oven or autoclave.
- The mold must withstand the cure temperature and be treated with a suitable release.
- Let prepreg reach room temperature in its sealed bag before opening, to avoid condensation on the material.
Storage
Prepreg has a limited out-life at room temperature and must be stored cold as recommended by the manufacturer. Record out-time to control usable life.
Specifications, dosage, operating conditions and safety requirements must be checked against the manufacturer’s current TDS/SDS before implementation.
Application information
Resin-preimpregnated carbon fabric
Suitable for high-performance parts requiring controlled resin content and laminate quality beyond conventional wet lay-up.
Cold storage, out-life, cure temperature, pressure and heat schedule must follow the exact prepreg TDS.

