Select by process requirements
A resin/gelcoat material for composite and FRP manufacturing processes.
Key considerations
- Select according to process and performance requirements
- Cure conditions and mix ratios must follow the current TDS
- Application review is available before grade selection
Application
- UG-850 is an unpromoted vinyl ester gelcoat: add accelerator (cobalt) and catalyst at the ratio and in the order given in the TDS. Never mix accelerator directly with catalyst, as they can react violently.
- The master or plug must be fully surface-prepared and release-treated before applying gelcoat.
- Apply evenly and avoid one heavy coat; laminate the tooling backup once the gelcoat has cured enough.
- Unwaxed: the surface stays receptive for the laminate behind it.
Why a tooling gelcoat
The mold surface defines the surface of every part made from it. A vinyl ester tooling gelcoat offers higher hardness, gloss and heat resistance than a standard product gelcoat, so the mold keeps its finish over more cycles.
Storage
Store in a cool place away from sunlight and heat; keep containers closed. Store accelerator and catalyst separately.
Current documents are provided by GKFRP upon request for the correct product grade and application.
Specifications, dosage, operating conditions and safety requirements must be checked against the manufacturer’s current TDS/SDS before implementation.
Application information
Tooling gelcoat for composite mold surfaces
Forms a mold surface requiring gloss, hardness and molding-cycle durability beyond a general product gelcoat.
Confirm resin base, acceleration state, catalyst, film thickness, temperature and cure schedule against the batch TDS before mold construction.

