Product overview
Select by process requirements
A tool or equipment item for composite and FRP production operations.
Key considerations
- Select size/model according to the task
- Review actual use requirements before ordering
- Related accessories can be selected together
Choosing a roller
- Aluminum ribbed roller: flat or large curved surfaces, CSM and woven roving.
- Aluminum spiral roller: thick laminates, large areas.
- Corner roller: corners, edges, ribs and tight radii.
- Bristle roller: thin plies, surface mat, curved surfaces.
Rolling technique
- Work from wetted areas into unfinished areas, from the center to the edges.
- Use just enough pressure and finish rolling before the resin starts to gel.
Cleaning and storage
Clean tools immediately after use, before the resin cures, with a compatible solvent (usually acetone) and following shop safety procedures. Let them dry before storage.
Technical note
Specifications, dosage, operating conditions and safety requirements must be checked against the manufacturer’s current TDS/SDS before implementation.
Application information
Product position
Laminating and air-removal roller set
Typical use
Different profiles distribute resin and consolidate reinforcement across flats, corners, ribs and varying radii.
Technical confirmation
Select the roller for part geometry and reinforcement type, then clean with a compatible procedure before resin cures.

