Wipe-on / wipe-off semi-permanent mold release
AXEL XTEND 1140HS is a proprietary modified-siloxane resin solution in an aliphatic solvent blend. As the carrier evaporates and the polymer cures, it forms a semi-permanent release film without requiring a separate sealer.
TDS applications
- Polyester: Iso, Ortho, DCPD and PET
- Vinyl ester
- Epoxy resin
- Wipe-on / wipe-off application
- High-gloss finish
- Compatible with most semi-permanent release systems
How to use
- Clean the mold thoroughly, removing wax and old release before the first application.
- Wipe on a thin coat with a clean, lint-free cloth and wipe off once the solvent has flashed, for an even film.
- Apply the initial coats with the cure time between coats given in the TDS before putting the mold into production.
- Touch up when demolding force starts to rise, before parts stick.
Benefits
No separate sealer required, high-gloss finish, compatible with most other semi-permanent systems. For polyester (iso, ortho, DCPD, PET), vinyl ester and epoxy.
Typical properties
Apply 2–4 light coats, allowing 15–20 minutes between coats, then cure for at least 30–60 minutes before molding. Apply at ambient temperature, ideally above 18°C; do not use above 177°C tool temperature and do not dilute.
GKFRP provides the current document upon request.

